How to Change The Brakes on a 2012 Honda Civic

Changing the brake pads on a car is a pretty simple task, but it can be a little intimidating for first-time mechanics.

If you're one of those people who always avoids going to the mechanic because you're afraid of getting ripped off, or if you just want to save some money and do the job yourself, then this blog post is for you. In this article, we'll show you how to change the brakes on a 2012 Honda Civic without spending a fortune on labor costs.

So whether you're a seasoned mechanic or a complete novice, follow these instructions and see how easy it is to do it yourself!

How to change the front brakes on a 2012 Honda Civic?

change the front brakes

Step 1 - Remove the wheel

Remove the wheel by removing the lug nuts from the hub. If you have a keyless entry system, remove the keys from the ignition before removing the lug nuts.

Step 2 - Remove the caliper bolts

Locate the caliper bolts that hold the brake calipers in place. These bolts can be found behind the brake pedal or inside the driver's door. Use a socket wrench to loosen these bolts. Once they are loose, pull them out.

Step 3 - Remove the caliper

Lift the caliper, so it does not fall off when you remove the bolt. Then, lift the caliper up and away from the rotor. Pull the caliper towards you until you feel resistance. The caliper should come right off.

Step 4 - Remove the rotor

The rotor is held onto the disc with two bolts. Remove both bolts and then pull the rotor straight out.

Step 5 - Replace the caliper

Replace the caliper with new one. Make sure the caliper has the correct size for your vehicle. Also, make sure the caliper is facing the same direction as it was previously.

Step 6 - Reinstall the wheel

Put the wheel back on and tighten the lug nuts.

How to change the rear brakes on a 2012 Honda civic?

Step 1 - Lift the car

Lift the car using jack stands or other means. Be careful not to damage any parts while lifting the car.

Step 2 - Unbolt the axle

Unbolt the axle by loosening the nut at the top of the axle. Use a ratchet tool to do this.

Step 3 - Loosen the wheel bearing

Loosen the wheel bearing by pulling the inner ring outwards. You may need to use a special tool to do this. A common one is called a "wheel lube."

Step 4 - Remove the wheel

Remove the wheel by loosening the lug nuts and pulling the wheel straight out.

Step 5 - Remove the caliper and rotor

Locate the caliper bolts and remove them. Then, remove the caliper and rotor by lifting them up and away from the disc.

Step 6 - Install the caliper

Install the new caliper by pushing it into place and tightening the bolts.

Step 7 - Install the rotor

How much does it cost to change the brakes on a 2012 Honda Civic?

You can expect to pay between $150 and $200 for labor alone. Labor rates vary depending on where you live. Expect to spend more than $100 for parts. Parts prices also vary depending on where you buy them.

What kind of tools do I need to change my brakes?

To change your brakes, you will need a set of wrenches, a screwdriver, a torque wrench, a breaker bar, a hammer, and some rags.

How do I know when my brakes need to be changed on a 2012 Honda Civic?

There are a few telltale signs that your brakes may need to be changed. For one, you may notice that it takes longer for your car to come to a stop. Or you may hear a strange grinding noise when you apply the brakes.

If you experience either of these issues, it's best to take your car to a mechanic and have them take a look. They'll be able to tell you for sure whether or not your brakes need to be changed.

In the meantime, try not to panic-braking will only make the problem worse![2]

What are the consequences of driving with bad brakes on a 2012 Honda Civic?

If you have worn out brakes, you could lose control of your vehicle. If you hit something, you could cause serious injury or death. It is important to keep your brakes in good working order.

How to change the brakes on a 2012 Honda Civic FAQs:

1. What are some warning signs that you need your brakes replaced?

Brakes are one of the most important safety features of your car. When you apply the brakes, the pads grip the rotors to slow down or stop your vehicle. If you start noticing any warning signs, it might be time to inspect your brakes.

- Pedal feels spongy or too high when you push it

- Noisy grinding sounds when you apply the brakes

- The brake pedal sinks to the floor when you apply pressure

- Your car pulls to one side or another

- You hear a squealing sound when braking

2. How do you know the size of the brake pads that are needed?

The brake pads are the most important part of the braking system. They are responsible for stopping the car, and if they are not replaced in time, it can lead to a very dangerous situation.

The size of your brake pads is determined by the vehicle’s make and model and its age. The more you drive your car, the more often you need to replace your brake pads.

3. What are some things that can go wrong when changing your brake pads?

Many things can go wrong when changing your brake pads. The most common is not having enough space to work on the brakes.

This is because of the tight space in between the driver's seat and the dashboard. It also becomes difficult to remove and replace old brakes pads because of this tight space.

Another thing that can go wrong is not having a good set of tools for changing your brake pads. This can make it hard to remove old parts, which may result in damaging them even more, or damaging other parts of your car.

And finally, one more thing that can go wrong is not having a good understanding of how to change brake pads. This could lead you to do something incorrectly or improperly, which could end up causing damage to other parts of your car as well.

4. How long does changing the brakes on a 2012 Honda Civic take?

The process of changing the brakes on a 2012 Honda Civic can take as little as half an hour, or it can take up to two hours. It all depends on the person doing the work, how many cars they've changed brakes on before, and what tools they have available.

5. What are some common mistakes people make when changing their brakes?

It is important to check your brake pads, rotors, and drums before you start the process of changing your brakes. This is because if any one of these components are worn down or damaged, it will cause problems when you are trying to change your brakes.

In order to avoid these mistakes, it is important to research the process of changing a brake before you do it. This way you know what tools and parts you need for the job and can be prepared for any problems that might come up during the process.


It is important to know how to change the brakes on your 2012 Honda Civic in order to keep you and your family safe. While it may seem like a daunting task, it is actually quite simple and only takes a few minutes. With a few tools and the right instructions, anyone can do it.

John D. Archer

John D. Archer is a mechanical engineer and writer based on the area of automotive accessories at, A resident expert and professional, John is passionate about all things automotive and loves to share his knowledge. He has good experience in all kind of automotive accessories. He has worked as a chief mechanical engineer in some reputed automotive garage firm.