Capri Tools Vacuum Brake Bleeder Review

Brake bleeding is done on hydraulic brake systems to get rid of air bubbles along its brake line. Of course. Brake fluids are incompressible liquids, but the presence of air bubbles dramatically reduces the efficiency of the fluids.   

Air bubbles reduce the hydraulic pressure within the brake system.  The bubbles can be very dangerous. We know the importance of brake in cars, and when driving.

Beyond getting air out of the brake system, Brake bleeding allows new brake fluids to flow into the system quickly. After being used for some time, rust and moisture can increase the efficiency of brake fluids.

To effectively change your brake fluid, you can't do it without some tools. Some of them are Vacuum brake bleeder, air compressor, car jack, jack stands, Bleeder wrench, and brake fluid specific to your vehicle type.

Arguably, a Vacuum brake bleeder is very important in brake bleeding, and it determines the result you will get. Capri Vacuum Brake Bleeder is one the best you can use.

Capri Tools Vacuum Brake Bleeder

Capri Tools Vacuum Brake Bleeder Review

This product helps avoid any messes and spills. It flushes even the most complicated ABS brake systems.

Capri Tool Vacuum Brake Bleeder has a name to reckon among brake bleeder. Capri is a leading manufacture in that field and has, over the years, proven to be reliable features.

Capri Brake Bleeder has some fantastic features that separate from other brands. It has an integrated silencer, which makes it with very low noise. The brake bleeder comes with a unique built-in cut-off feature; this makes Bleeder stop extraction when its reservoir is full.

It drains the ABS brake system almost effortlessly, with no spills, no messes. The Bleeder is a lightweight pneumatic vacuum brake bleeder. It uses vacuum to clean and flush hydraulic brake systems correctly.

Capri Tool Vacuum Brake Bleeder weighs 3 pounds, with 10 inches by 10 inches by 8 inches dimension.

Its unique specification separates from other brands: it can work within the temperature range of -3 to 140F. It can hold up to 2 liters of fluids. Capri bleeders have an average Air Consumption of 2CFM.

Capri Tools build the foundation of its services in three words: Passion, People, and Quality. The brand is known for offering a fantastic customer experience. The positives feedbacks received over the years has proven that to be true. Capri after-sale services are out of this world, nothing short of excellence.

Many Capri Tools products come with a limited lifetime warranty. The company repairs defective products without charge, provided the error comes from the company.

Features

  • Integrated Silencer:  The presence of integrated silencer makes the Vacuum Cleaner work with little or noise
  • Built-In Venturi System: It has a Built-in Vacuum system that drains and bleeds hydraulic brakes and clutches without having any bubbles.
  • Silicon Hose with Universal Rubber Adapter: The Bleeder works with oil bleeder fittings of most vehicles. It has the most standard and ABS brake systems.

Pros & Cons of Capri Tools Vacuum Brake Bleeder

Pros

  • Has integrated silencer
  • Comes with Built-in Venturi System
  • Has Universal rubber adapter
  • You don't need the expertise to operate it.
  • It is portable.
  • Works with any air compressor
  • Comes with a trigger clip that assists its operations

Cons

  • It pulls air around the screw thread.
  • Let air back into the caliber
  • It has a short hose.

Why is Capri tools Vacuum Brake Bleeder the best choice?

Capri is a leader among other types of bleeders in the market. There are other reasons why you should choose the product over others.


It is effortless to operate. You don't need to be an expert or elaborate manual before you can run. You have to connect the adapters to the breeder values and press down the handles. It starts working.


Despite all the fantastic qualities that have noted in this review, Capri Bleeder is not expensive. It's easy to operate and save your time. It can get your four brakes done in 30 minutes.


It would be good to know that the Capri tool Brake Vacuum Bleeder holds more fluids than any other bleeder in the market.


You don't need an extra hand to operate this tool, made to be used by one person. Another advantage is that it doesn't tamper with your Vehicle's ABS; it does a phenomenal job on brakes.

How to use a Capri Vacuum Brake cleaner? 

  1. Connect the air compressor hose to the air inlet. Having done that, connect with the silicon hose before you dip into a fluid channel.
  2. Clean the old brake fluid from the master cylinder. To do this. Turn on the air compressor. Before you insert brake bleeder nipple, remove the master cylinder reservoir cap.  Press the vacuum's airflow handle to remove old fluid from the reservoir.
  3. Fill the master cylinder reservoir with fresh brake fluid. Check your Vehicle's manual for brake fluid type.
  4. Put the right sized box wrench over on the vacuum bleeder screw. Then put the bleeder nipple on the bleeder screw. 
  5. Put on the air compressor, press the airflow handle, move the handle over securing clamp for continuous suctions. 
  6. When you want to bleed your brakes. Unscrew bleeder screw on your Vehicle till brake fluid starts drawing out.
  7. Before you stop extraction and remove the rubber bleeder’s nipple. Close the bleeder screw. 
  8. What you have done in 3 to 6, do the same on the passenger side, rear driver side, and back passenger side.
  9. Fill the master cylinder reservoir to the maximum level, and ensure you replace the master cylinder cap after doing that.
  10. Start the engine and check the brake pedal if it is firm. The break isn't firm. Repeat the bleeding process.

How to maintain and service your Vacuum Land Cleaner

  1. Don't clean vacuum cleaners with a solvent that can damage its plastic component.
  2. Use a clean cloth and mild detergents to wipe off the dirt.
  3. Don’t store fluids in tanks after use. 
  4. Keep Vacuum brake cleaner in dry places out of children’s reach. 
  5. Before you operate the machine, check for broken parts and loose connections.
  6. Never operate a damaged Vacuum Brake Bleeder
  7. If any of the before mentioned things are spotted, take to a technician before use.
  8. Get rid of excess fluids in compliance with Federal and state guidelines.

Capri Vaccuum Bleeder, For Brakes or Hydraulic Clutches

Capri Tools Vacuum Brake Bleeder FAQs

How do I know the correct brake fluids to be used with Vacuum bleeders? 

Check your vehicle manual for the correct brake fluid type. If you can't get it, you can contact your vehicle service provider.


Is it possible to remove the lid from the tank?

If you had any reason to remove the lid from the tanks, ensure that you reattach it to the tank before operating again. Do not, for any reason, run the Vacuum bleeder without the tank lid, it is hazardous.


Should I remove my Vehicle’s wheel while bleeding? 

Vacuum bleeding can be done without removing the wheel. Before you do that, make sure enough space to pass the bleeder nipple through the Vehicle's wheel or under it.


How do I clean my Vacuum Brake Cleaner? 

Don't drip your cleaner into any liquid. And don't use solvents that can harm the plastic component.


How best can I store my Vacuum Cleaner? 

Drain liquid from cleaners after use, never leave fluids in the filter. Dispose of liquid according to the states and federal guidelines.   Store in a dry location and keep out of children's reach.


Is there any pre-operation procedure before using the cleaner?

Before using your machine, check for loose connections, broken parts, and misalignments. Do not use it if anything looks out of place. Check out with an expert. Safety is key.


How many years of warranty come with Capri Tools products?

The vacuum cleaner comes with a one year warranty. However, the cleaner has a manufacturing fault within the expected years of use. It would be repaired at no cost.   


Do I need a mechanic to do brake bleeding?

No, you don't need a mechanic to do your bleeding. You can do it on your own, and it saves you money and time. Capri Tool Vacuum was made to be operated easily.


How often should I do break bleeding? 

No time attached to that. However, consider bleeding when your brake is losing its grip.  


How often should I recalibrate my brake bleeders? 

When you are not getting accurate results, go and recalibrate your bleeders. 

Final Verdict

Capri Tool Vacuum Brake Bleeder should be your first choice to consider when you want to bleed your brake. The company has a reputation for manufacturing high-quality products.


The Vacuum Brake Bleeder is affable, saves a whole lot of time, and works with extremely low noise. Though it is a piece of powerful and quick suction equipment, it is easy to move around.


An investment in the product won’t be a waste of your money. You will get value for it.