Published: November 29, 2026 | Last updated: November 29, 2026

TL;DR

  • CRC Disc Brake Quiet (part 05016) is a red paste that dries into a water-resistant, high-temperature film on the back of disc brake pads (NAPA, 2026).
  • It is an elastomeric multi-polymer compound made to dampen the vibrations that cause brake squeal (Autopro, 2026).
  • CRC says it is for the back of non-shimmed disc pads only (NAPA, 2026).
  • It is non-flammable, ABS-compatible and resists hot and cold water wash-off and high-temperature sling-off (NAPA, 2026; Autopro, 2026).
  • Owners rate it 4.6 out of 5 from more than 1,700 reviews, but one listing marks it as discontinued, so check availability (Desertcart, 2026).

Disclosure: As an Amazon Associate, Brakes Hub earns from qualifying purchases. This never changes our verdicts.

How we reviewed this product: we studied CRC's published product information, retailer specifications and owner feedback. We did not run our own tests.

What Is CRC Disc Brake Quiet?

CRC Disc Brake Quiet is an anti-squeal paste that you brush onto the back of disc brake pads. Once dry, it forms a rubbery film that absorbs the vibration behind brake squeal (Autopro, 2026).

It comes in a 4 fl oz bottle with a red, acrylic-smelling paste (NAPA, 2026). CRC recommends it for disc brakes on cars, 4WDs, forklifts, tractors and other machinery (Autopro, 2026).

CRC Industries also makes Brakleen brake cleaner. See our CRC Brakleen review.

Why Disc Brakes Squeal

Disc brakes squeal when the pad vibrates against the caliper at a high frequency. The vibration makes the pad backing plate act like a speaker, producing a loud, high-pitched noise.

Many pads come with shims, which are thin layered plates bonded to the back of the pad to absorb that vibration. Pads without shims are more likely to squeal.

A simple comparison is a ringing wine glass. Touch the rim with your finger and the ringing stops, because something soft is absorbing the vibration. Disc Brake Quiet acts like that finger.

CRC Disc Brake Quiet Details at a Glance

CRC Disc Brake Quiet is a non-flammable, slow-drying red paste. The table lists the published details.

DetailCRC Disc Brake Quiet 05016
FormRed paste, dries to a film
Size4 fl oz bottle
FlammableNo
ABS compatibleYes
Water resistantYes
Use onBack of non-shimmed disc pads
Shelf life10 years, per one US listing
RemovalDegreaser or brake cleaner

Sources: NAPA (2026); Stellar Industrial (2026); Autopro (2026).

When to Use Disc Brake Quiet

Use CRC Disc Brake Quiet on the back of disc pads that do not have shims. CRC states it is for non-shimmed pads (NAPA, 2026).

It can be applied to new pads or to pads already in service (Motion Industries, 2026). This makes it useful for fixing a squeal without buying new pads.

Do not use it on pads with factory shims, and never put it on the friction material or rotor. For metal-to-metal contact points such as clips, use a brake lubricant instead, such as Permatex Ceramic Extreme.

How to Apply CRC Disc Brake Quiet

To apply Disc Brake Quiet, clean the pad backing, brush on a thin coat, let it dry until tacky and then fit the pads. Follow these steps.

  1. Remove the pads from the caliper.
  2. Clean the back of each pad with brake cleaner and let it dry.
  3. Brush a thin, even coat of paste onto the metal backing plate only.
  4. Let it dry until it turns tacky, which usually takes a few minutes; it has a slow evaporation rate (Stellar Industrial, 2026).
  5. Fit the pads into the caliper, taking care to keep paste off the friction surface.
  6. Refit the caliper and torque all bolts to specification.

Fresh hardware also helps stop squeal. See our Dorman hardware kit review.

Pros and Cons of CRC Disc Brake Quiet

The main strength of CRC Disc Brake Quiet is a simple, non-flammable way to stop squeal on non-shimmed pads, and the main limit is that it is not meant for pads with shims.

Pros

  • It dampens the vibrations that cause squeal.
  • It resists water wash-off and high-temperature sling-off.
  • It is non-flammable and ABS-compatible.
  • Owners report it fixed stubborn squeals (Desertcart, 2026).

Cons

  • It is only for non-shimmed pads.
  • It needs time to dry before fitting the pads.
  • At least one listing marks it discontinued, so stock may vary.

Common Brake Noise Problems and How to Fix Them

Brake squeal can come from several sources, and anti-squeal paste only fixes vibration between the pad and caliper.

NoiseLikely causeSolution
High squeal when braking lightlyPad vibration against the caliperApply Disc Brake Quiet to non-shimmed pads
Squeal over bumpsWorn or missing clipsFit new hardware
GrindingPads worn to the metalReplace pads and rotors at once
Steady squeal when not brakingWear indicator touching the rotorReplace the pads

Frequently Asked Questions About CRC Disc Brake Quiet

Where do I apply CRC Disc Brake Quiet?

Apply it to the back of non-shimmed disc brake pads only (NAPA, 2026).

Can I use Disc Brake Quiet on pads with shims?

CRC says it is for non-shimmed pads (NAPA, 2026). Pads with shims already have noise damping.

Is CRC Disc Brake Quiet flammable?

No. NAPA lists it as non-flammable (NAPA, 2026).

How do I remove CRC Disc Brake Quiet?

Remove it with a degreaser or brake cleaner (NAPA, 2026).

Can I apply it to pads already on the car?

Yes. It can be applied to new or previously installed pads (Motion Industries, 2026).

Is CRC Disc Brake Quiet discontinued?

One listing marks it as discontinued by the manufacturer (Desertcart, 2026), while other retailers still list it. Check stock before you plan a job around it.

Summary: Is CRC Disc Brake Quiet Worth Buying?

  • CRC Disc Brake Quiet is a red paste that stops squeal on non-shimmed disc pads.
  • It dries to a water-resistant, high-temperature film.
  • Keep it off friction surfaces and do not use it on shimmed pads.
  • Check availability, because at least one listing shows it discontinued.

Our brake grease guide explains which products go where.

Check CRC Disc Brake Quiet on Amazon →

Safety note: brakes are safety parts. If you are not sure how to do the job, have a qualified mechanic do it.