Published: November 15, 2026 | Last updated: November 15, 2026

TL;DR

  • Dorman First Stop disc brake hardware kits contain the clips, pins and small parts needed to service one full axle during a pad change (PartsAvatar, 2026).
  • Each kit is vehicle-specific and designed to match the fit and function of the factory hardware (PartsAvatar, 2026).
  • Dorman recommends replacing all hardware at every pad replacement for the best safety and performance (PartsAvatar, 2026).
  • Kits typically include abutment clips and anti-rattle clips, and some include pins, bushings or pin tips; brake lubricant is not included (Cobalt Industrial, 2026; FinditParts, 2026).
  • Fresh hardware is one of the simplest ways to stop squeal, rattle and uneven pad wear after a brake job.

Disclosure: As an Amazon Associate, Brakes Hub earns from qualifying purchases. This never changes our verdicts.

How we reviewed this product: we studied Dorman's published product information, retailer specifications and owner feedback. We did not run our own tests.

What Is a Dorman Disc Brake Hardware Kit?

A Dorman disc brake hardware kit is a set of replacement clips and small parts that hold brake pads in the caliper bracket and let them slide freely. Dorman sells these kits under its First Stop brand (PartsAvatar, 2026).

Each kit is made for a specific vehicle, year, make and model, and covers one full axle (PartsAvatar, 2026). Part numbers usually start with "HW".

Dorman is a US supplier of replacement parts with more than a century of automotive experience behind its product team (Cobalt Industrial, 2026).

Why Brake Hardware Matters

Brake hardware holds the pads in position, lets them slide smoothly and stops them from rattling. Worn or rusty hardware can make even new pads squeal, drag or wear unevenly.

Abutment clips are thin stainless or steel plates that sit where the pad ears slide in the bracket. Over time, rust builds up under them and the clips lose their spring.

A good comparison is a drawer runner. When the runner is clean and straight, the drawer glides. When it is bent or rusty, the drawer sticks halfway, just like a pad on worn clips.

What Is in a Dorman Hardware Kit?

A Dorman kit contains the hardware for one axle, matched to your vehicle. Contents vary by part number, but common items include:

  • Abutment clips that the pad ears slide on (Cobalt Industrial, 2026).
  • Anti-rattle clips that keep the pads from vibrating (PartsAvatar, 2026).
  • Pins, bushings or pin tips on some applications (FinditParts, 2026).

Brake lubricant is not included, so buy a suitable grease separately (Cobalt Industrial, 2026).

Dorman Hardware Kit Details at a Glance

Dorman hardware kits are application-specific, full-axle sets designed as direct replacements. The table lists typical published details.

DetailDorman First Stop hardware kit
FitVehicle-specific direct replacement
CoverageOne full axle
Clip materialStainless steel on many kits
Typical contentsAbutment clips, anti-rattle clips, pins or bushings
Brake lubricantNot included

Sources: PartsAvatar (2026); Cobalt Industrial (2026); FinditParts (2026).

How to Install a Dorman Disc Brake Hardware Kit

To install new hardware, remove the old clips, clean the bracket to bare metal, lubricate lightly and fit the new clips before the pads. Follow these steps.

  1. Lift the car, support it on jack stands and remove the wheel.
  2. Remove the caliper and pads, then pull the old clips out of the bracket.
  3. Clean rust from the abutment areas with a stiff brush, such as the Lisle 13410 caliper brush.
  4. Wipe the bracket clean with brake cleaner and let it dry.
  5. Fit the new clips so they sit flat and snap fully into place.
  6. Apply a thin film of brake lubricant where the pad ears touch the clips. Our Permatex Ceramic Extreme review covers one option.
  7. Fit the pads; they should slide in the clips by hand without force.
  8. Refit the caliper, torque all bolts and repeat on the other side.

If your kit includes slide pin bushings or boots, use a rubber-safe grease such as Sil-Glyde on the pins.

Pros and Cons of Dorman Disc Brake Hardware Kits

The main strength of Dorman hardware kits is a simple, vehicle-specific way to replace all pad hardware at once, and the main limit is that lubricant is sold separately.

Pros

  • Kits are matched to each vehicle for a direct fit.
  • One kit covers a full axle.
  • Many kits use stainless clips that resist rust.
  • New hardware helps prevent squeal and uneven pad wear.

Cons

  • Brake lubricant is not included.
  • Contents vary by part number, so check the listing.
  • Many premium pads already include hardware.

Common Brake Hardware Problems and How to Fix Them

Most hardware problems come from rust under the clips, clips fitted the wrong way or skipped lubrication.

ProblemLikely causeSolution
Pads tight in the bracketRust left under new clipsRemove the clips, clean to bare metal and refit
Rattle over bumpsAnti-rattle clip missing or looseFit the clip correctly so it holds the pad firmly
Squeal after the jobDry pad contact pointsApply a thin film of brake lubricant
Uneven pad wearSticking slide pinsClean and lubricate the pins, or replace them

Frequently Asked Questions About Dorman Brake Hardware Kits

Do I need new brake hardware with new pads?

Dorman recommends a full hardware replacement at every pad change for the best safety and performance (PartsAvatar, 2026).

Does a Dorman hardware kit cover both wheels?

Yes. Each kit contains enough hardware for a full-axle repair (PartsAvatar, 2026).

Does the Dorman kit include brake grease?

No. Brake lubricant is not included (Cobalt Industrial, 2026).

Are Dorman brake clips stainless steel?

Many Dorman kits use stainless-steel clips (FinditParts, 2026). Check the specification for your part number.

How do I find the right Dorman hardware kit?

Search by your vehicle's year, make, model and axle. Kits are application-specific, and front and rear kits are different.

Can I reuse old brake clips?

You can if they are clean, flat and still springy, but rusty or bent clips often cause noise and dragging.

Summary: Is a Dorman Disc Brake Hardware Kit Worth Buying?

  • Dorman First Stop kits replace the clips and small parts for one full axle.
  • They are vehicle-specific direct replacements for the factory hardware.
  • Clean the bracket to bare metal before fitting new clips.
  • Buy a suitable brake lubricant separately.

Our brake grease guide explains which lubricant goes where.

Check Dorman hardware kit fitment on Amazon →

Safety note: brakes are safety parts. If you are not sure how to do the job, have a qualified mechanic do it.