Published: October 12, 2026 | Last updated: October 13, 2026
TL;DR
- Centric Posi-Quiet ceramic pads are made with the same positive molding process used by original equipment suppliers (BuyBrakes, 2026).
- Precision-cut or shaved backing plates and mechanically attached shims help the pads fit the caliper and cut noise from vibration (BuyBrakes, 2026).
- A scorching process removes impurities and pre-burnishes the pads, which speeds up break-in (BuyBrakes, 2026).
- The friction is post-cured for consistent performance through the life of the pad (BuyBrakes, 2026).
- All Posi-Quiet formulas are asbestos-free, and hardware is included where the application needs it (BuyBrakes, 2026).
Disclosure: As an Amazon Associate, Brakes Hub earns from qualifying purchases. This never changes our verdicts.
How we reviewed this product: we studied Centric's published product information and retailer listings, and compared Posi-Quiet with other quiet ceramic pads. We did not run our own brake tests.
What Are Centric Posi-Quiet Ceramic Brake Pads?
Centric Posi-Quiet ceramic pads are replacement brake pads aimed at drivers who want quiet, clean, OE-style braking. Part numbers in the ceramic line start with "105", such as 105.09061 for some Toyota Sienna and Avalon models (Walmart, 2026).
Posi-Quiet comes in three application-specific compounds, and the ceramic version is the one most drivers choose for daily driving (BuyBrakes, 2026).
Centric Parts is a US brake parts maker that also produces the Fleet Performance and premium rotor lines.
How Posi-Quiet Pads Reduce Noise
Most brake squeal comes from the pad vibrating in the caliper. Centric attacks this in two ways: an exact fit and a firmly attached shim.
- Precision-cut or shaved backing plates make the pad fit the caliper bracket closely, so it has less room to move.
- Mechanically attached shims are locked to the backing plate instead of glued, so they stay in place and keep absorbing vibration.
Centric says these details virtually eliminate noise caused by pad vibration (BuyBrakes, 2026). A good comparison is a picture frame: if it is tight on the wall and has a rubber bumper behind it, it will not rattle when a door slams.
What Positive Molding and Scorching Mean
Positive molding presses each pad's friction material individually under high pressure. Original equipment suppliers use the same method, and it gives the friction material an even density across the whole pad (Walmart, 2026).
Scorching heats the pad surface in the factory. This burns out leftover resins and impurities and pre-burnishes the pad, so it beds in faster on your car (BuyBrakes, 2026).
Post-curing is a final heat treatment that helps the pad perform the same way from the first mile to the last (BuyBrakes, 2026).
Centric Posi-Quiet Features at a Glance
| Feature | What it does | Source |
|---|---|---|
| Positive molding | Even friction density, like OE pads | BuyBrakes, 2026 |
| Precision-cut backing plates | Exact fit in the caliper | BuyBrakes, 2026 |
| Mechanically attached shims | Cut vibration noise | BuyBrakes, 2026 |
| Scorched surface | Faster break-in | BuyBrakes, 2026 |
| Post-cured friction | Consistent performance over pad life | BuyBrakes, 2026 |
| Hardware where applicable | Fresh clips and shims for installation | BuyBrakes, 2026 |
Centric Posi-Quiet vs Other Ceramic Pads
Choose Posi-Quiet when you want OE-style construction and a strong focus on low noise for a daily driver.
| Pad | Best for |
|---|---|
| Centric Posi-Quiet Ceramic | Quiet OE-style daily driving |
| Centric Fleet Performance | Work vehicles and heavy daily use |
| Akebono ProACT | Very quiet premium ceramic pads |
| Wagner ThermoQuiet | Quiet pads with an integrated insulator |
How to Install Centric Posi-Quiet Pads
To install Posi-Quiet pads, match the 105-series part number, fit them on smooth rotors with the included hardware, and bed them in. Follow these steps.
- Match the 105-series part number to your vehicle's year, model and axle.
- Check whether your set includes a wear sensor or hardware. Some sets include both (BuyBrakes, 2026).
- Measure the rotors and replace any that are below minimum thickness or deeply grooved.
- Clean the caliper bracket and fit the new clips if included.
- Lubricate the contact points lightly with brake grease, keeping it off the friction surface.
- Fit the pads, refit the caliper and torque all bolts to specification.
- Bed in the pads using our bed-in guide.
Pros and Cons of Centric Posi-Quiet Pads
The main strength of Centric Posi-Quiet pads is quiet, OE-style construction with fast break-in, and the main limit is that they are made for normal driving, not track use.
Pros
- Positive molding matches OE manufacturing.
- Mechanically attached shims stay in place.
- Scorched surface shortens break-in.
- Hardware and wear sensors included on many sets.
Cons
- Not designed for towing or track days.
- Hardware is included only where the application needs it.
- Ceramic compound may feel less aggressive than semi-metallic pads on heavy vehicles.
Common Problems After Fitting New Pads
| Problem | Likely cause | Solution |
|---|---|---|
| Squeal at low speed | Dry contact points or old clips | Fit new clips and lubricate contact points |
| Pulsing pedal | Worn or uneven rotors | Replace or resurface the rotors |
| Brake warning light on | Wear sensor not fitted | Fit the included wear sensor |
| Uneven pad wear | Sticking slide pins | Clean and lubricate the pins |
Frequently Asked Questions About Centric Posi-Quiet Pads
Are Centric Posi-Quiet pads ceramic?
The 105-series Posi-Quiet pads use a ceramic compound. Posi-Quiet also comes in other compounds for other uses (BuyBrakes, 2026).
Do Centric Posi-Quiet pads come with shims?
Yes. They have mechanically attached shims (BuyBrakes, 2026).
Do Centric Posi-Quiet pads include hardware?
Hardware is included where the application needs it (BuyBrakes, 2026).
Do Centric Posi-Quiet pads need to be bedded in?
The scorching process speeds up break-in, but a proper bed-in still gives the best results.
Are Centric Posi-Quiet pads asbestos-free?
Yes. All Posi-Quiet formulas are asbestos-free (BuyBrakes, 2026).
What is the difference between Posi-Quiet and Fleet Performance?
Posi-Quiet focuses on quiet daily driving, while Fleet Performance is built for work vehicles and heavier use.
Summary: Are Centric Posi-Quiet Pads Worth Buying?
- Centric Posi-Quiet ceramic pads use OE-style positive molding.
- Precision backing plates and locked-on shims cut vibration noise.
- Scorching and post-curing give fast break-in and steady performance.
- Choose Fleet Performance for work vehicles and heavier use.
Check Centric Posi-Quiet fitment on Amazon →
Safety note: brakes are safety parts. If you are not sure how to do the job, have a qualified mechanic do it.