Brakes Hub Blog
Expert guides on brake pads, rotors, maintenance & safety
All Articles
StopTech Sport Slotted Rotors Review: Bolt-On Slotted Rotors for Stre…
StopTech Sport Slotted rotors are a bolt-on upgrade for stock calipers. Here is what slots do and w…
Cardone Remanufactured Brake Caliper Review: Pressure-Tested Reman Ca…
Cardone is one of the biggest names in remanufactured brake calipers. Here is what a reman caliper …
Lisle 24400 Brake Pad Spreader Review: Simple Screw Tool for Front Ca…
The Lisle 24400 is a small, simple tool for pushing caliper pistons back. Here is when it helps and…
OEMTOOLS Disc Brake Tool Set Review: Wind Back Rear Caliper Pistons a…
Rear calipers with a built-in parking brake need a wind-back tool. Here is how the OEMTOOLS set wor…
Sil-Glyde Brake Lubricant Review: Rubber-Safe Silicone Grease for Sli…
Sil-Glyde has been a go-to caliper grease for decades because it does not swell rubber parts. Here …
Wagner OEX Brake Pads Review: Premium Ceramic Pads for Trucks, SUVs a…
Wagner OEX is Wagner's premium line for 2005-and-newer cars, trucks and SUVs. Here is what the cust…
Akebono EURO Brake Pads Review: Ceramic Pads Built for European Cars
Many European cars are known for heavy brake dust. Akebono's EURO line is made to fix that. Here is…
CRC Brakleen Review: Non-Chlorinated Brake Parts Cleaner Tested Again…
CRC Brakleen is one of the best-known brake cleaners. Here is what it does well and how to use it s…
Safe Driving When the Brake Pedal Goes Low: What It Means and What to…
A brake pedal that goes low usually means the braking system is not building pressure normally. Slo…
Brake Pedal Goes Low: What to Inspect When Brakes Still Work
A brake pedal that goes low can still leave the car stopping, but it usually signals air, wear, or …
Why Your Brake Pedal Sinks Low When Stopped: Causes, Checks, and Safe…
A brake pedal that sinks low when stopped usually points to loss of hydraulic pressure in the brake…
Brake Pedal Drops Too Far: Signs of Hydraulic Trouble and What to Che…
A brake pedal that drops too far usually means the hydraulic system is losing pressure, losing flui…