Published: December 23, 2026 | Last updated: December 23, 2026

TL;DR

  • Lisle brake caliper hangers are a pair of 9-inch hooks that hold a caliper to the side while keeping tension off the brake hose (Turner Motorsport, 2026).
  • They protect calipers and brake lines during brake, suspension and hub work (Turner Motorsport, 2026).
  • Each set includes 2 hangers and is covered by Lisle's lifetime replacement program (Turner Motorsport, 2026).
  • Letting a caliper hang by its rubber hose can damage the hose inside, where you cannot see it.
  • They are a small, low-cost tool that makes every brake job safer and tidier.

Disclosure: As an Amazon Associate, Brakes Hub earns from qualifying purchases. This never changes our verdicts.

How we reviewed this product: we studied Lisle's published product description and retailer listings, and compared caliper hangers with other ways of supporting a caliper. We did not run our own tests.

What Are Lisle Brake Caliper Hangers?

Lisle brake caliper hangers are S-shaped hooks that support a brake caliper once you remove it from the rotor. One end hooks onto the suspension or spring, and the caliper rests in the other end (Turner Motorsport, 2026).

Each hanger is 9 inches long, and the set includes two, one for each side of the axle (Turner Motorsport, 2026).

Lisle is a US tool maker founded in 1903 in Clarinda, Iowa (ToolsID, 2026).

Why You Should Never Let a Caliper Hang on Its Hose

A caliper is heavy, and its flexible rubber brake hose is not designed to carry that weight. Hanging a caliper on its hose can stretch or kink it and damage the inner layers.

This kind of damage may not show on the outside. A hose with internal damage can bulge under pressure, restrict fluid flow or fail later, which can cause a soft pedal or a caliper that drags.

A good comparison is a garden hose used as a rope. It might hold the load once, but the bends and stretch weaken it over time.

How Caliper Hangers Work

Caliper hangers take the weight of the caliper off the hose and hold it out of your way. Lisle says they hang the caliper to the side while keeping tension off the brake line (Turner Motorsport, 2026).

  1. You hook one end over a solid part such as the coil spring or control arm.
  2. You lift the caliper off the rotor and rest it in the other hook.
  3. The hose stays slack and the caliper stays clear of the hub while you work.

Caliper Hangers vs Other Ways to Support a Caliper

Purpose-made hangers are the quickest and tidiest option, while wire and zip ties work in a pinch but take more time.

MethodSpeedHose safetyReusable
Lisle caliper hangersFastGoodYes
Mechanic's wireSlowGood if tied wellSometimes
Zip tiesModerateFairNo
Resting on a box or standModerateGood if stableYes
Hanging on the hoseFastPoor, can damage the hoseNot recommended

How to Use Lisle Caliper Hangers Step by Step

To use caliper hangers, hook them onto a solid part before removing the caliper, then rest the caliper in the lower hook with the hose slack. Follow these steps.

  1. Lift the car, support it on jack stands and remove the wheel.
  2. Hook the top of the hanger over the coil spring, strut or upper control arm.
  3. Remove the caliper bolts and lift the caliper off the bracket.
  4. Rest the caliper in the lower hook so the brake hose hangs loose with no twist.
  5. Check that the hose is not stretched or kinked.
  6. Do your work, such as cleaning the bracket with the Lisle 13410 brush or fitting new pads.
  7. Lift the caliper out of the hanger and refit it, then torque the bolts to specification.

Other Jobs Where Caliper Hangers Help

Caliper hangers are useful for any job that needs the caliper out of the way. Lisle lists brake, suspension and hub work (Turner Motorsport, 2026).

  • Replacing rotors, where the caliper and bracket must come off.
  • Replacing wheel bearings or hubs.
  • Replacing struts, ball joints or control arms.
  • Replacing a brake hose, where the caliper must be held while you swap the line.

If you are replacing hoses, see our Goodridge G-Stop review.

Pros and Cons of Lisle Caliper Hangers

The main strength of Lisle caliper hangers is quick, safe caliper support that protects the brake hose, and the main limit is that very short or awkward suspensions may need a different hook point.

Pros

  • They keep tension off the brake hose.
  • They are faster than tying the caliper with wire.
  • The set includes two hangers, one per side.
  • Lisle backs them with a lifetime replacement program.

Cons

  • A 9-inch length may be too long or too short for some vehicles.
  • You need a solid hook point nearby.
  • They do not replace jack stands or other safety equipment.

Common Mistakes When Supporting a Caliper

MistakeRiskBetter approach
Letting the caliper hang on its hoseInternal hose damageUse a hanger or rest the caliper on a support
Twisting the hose when refittingHose kinks and wearsCheck the hose sits naturally before tightening bolts
Hooking onto a brake lineBent hard lineHook only onto springs or suspension arms
Pressing the pedal with the caliper offPiston pushed outNever press the pedal until the caliper is refitted

Frequently Asked Questions About Lisle Caliper Hangers

How long are Lisle caliper hangers?

Each hanger is 9 inches long (Turner Motorsport, 2026).

How many hangers come in a set?

Each set includes two hangers (Turner Motorsport, 2026).

Can I let a brake caliper hang by its hose?

No. The hose is not designed to carry the caliper's weight and can be damaged inside.

Where do I hook a caliper hanger?

Hook it onto a solid part such as the coil spring or a control arm, never onto a brake line.

Do Lisle caliper hangers have a warranty?

Lisle covers them with its lifetime replacement program (Turner Motorsport, 2026).

Can I use caliper hangers for suspension work?

Yes. Lisle lists brake, suspension and hub maintenance as uses (Turner Motorsport, 2026).

Summary: Are Lisle Caliper Hangers Worth Buying?

  • Lisle caliper hangers hold the caliper aside while keeping tension off the brake hose.
  • They are quicker and tidier than wire or zip ties.
  • Hook them onto a solid suspension part, never onto a brake line.
  • They are a small tool that makes every brake job safer.

See the rest of the tools you need in our DIY brake job tools checklist.

Check Lisle caliper hangers on Amazon →

Safety note: brakes are safety parts. If you are not sure how to do the job, have a qualified mechanic do it.