Published: December 5, 2026 | Last updated: December 5, 2026

TL;DR

  • RhinoRamps (model 11909) are plastic drive-on ramps rated for vehicles up to 12,000 lb gross vehicle weight (GVW) (Walmart, 2026).
  • They lift the vehicle 6.5 inches on a 17-degree incline, which suits many low-clearance cars (ExtremeTerrain, 2026).
  • Each ramp holds 3,000 lb, or 6,000 lb per pair, and tires should be at least 1 inch narrower than the 11.5-inch ramp width (ExtremeTerrain, 2026).
  • A CoreTRAC non-skid base reduces slipping, and the ramps nest together for storage (Walmart, 2026).
  • Ramps hold the car on its tires, so they suit brake line, fluid and inspection work, not wheel-off pad and rotor jobs.

Disclosure: As an Amazon Associate, Brakes Hub earns from qualifying purchases. This never changes our verdicts.

How we reviewed this product: we studied the published specifications, retailer listings and owner feedback, and compared ramps with jack stands for brake work. We did not run our own load tests.

What Are RhinoRamps?

RhinoRamps are portable drive-on ramps made from structural foam plastic. You drive the front or rear wheels up onto them to raise the vehicle for work underneath (ExtremeTerrain, 2026).

They are sold by Hopkins under the FloTool and RhinoGear names. Hopkins says they are the only PASE-certified resin ramps (Hopkins, 2019).

A larger RhinoRamps MAX version (11912) is rated at 16,000 lb GVW and fits wider tires (Hopkins, 2019).

How Drive-On Ramps Work

Drive-on ramps lift a vehicle by its tires instead of its frame. The car climbs a gentle slope and stops on a flat cradle at the top.

Because the car rests on its tires, it stays as stable as when parked. Ramps have no mechanism that can slip or leak, unlike a hydraulic jack.

A good comparison is a car parked on a raised driveway. The wheels carry the weight just as they do on the road, only higher up.

RhinoRamps Specifications at a Glance

SpecificationRhinoRamps 11909
Vehicle ratingUp to 12,000 lb GVW
Weight per ramp3,000 lb (6,000 lb per pair)
Lift height6.5 inches (8.5 inches overall)
Incline17 degrees
Length36 inches
Ramp width11.5 inches
Tire widthAt least 1 inch narrower than the ramp
BaseCoreTRAC non-skid

Sources: ExtremeTerrain (2026); Walmart (2026). Walmart lists a 9-inch tire width, so check your tire size before buying.

Can You Use Ramps for a Brake Job?

Ramps are useful for some brake work but not for changing pads or rotors, because the wheels must stay on the ramps. For any wheel-off job, use a floor jack and jack stands.

Ramps work well for these brake-related tasks:

  • Inspecting brake lines and hoses for rust, cracks or leaks.
  • Replacing hard brake lines along the frame.
  • Reaching rear bleeder screws on some trucks with the front on ramps.
  • Checking the parking brake cable and its brackets.

For pad and rotor jobs, see our Big Red jack stands review and Arcan floor jack review.

How to Use RhinoRamps Safely

To use RhinoRamps safely, place them on level ground, line them up with the tires, drive up slowly and secure the vehicle before going underneath. Follow these steps.

  1. Place the ramps on a flat, hard surface such as concrete.
  2. Line each ramp up straight with its tire.
  3. Drive up slowly with a helper guiding you, and stop in the cradle at the top.
  4. Put the transmission in park, or in gear for a manual, and set the parking brake.
  5. Chock the wheels that are still on the ground.
  6. Rock the vehicle gently to check that it is stable before going underneath.

Pros and Cons of RhinoRamps

The main strength of RhinoRamps is quick, stable lifting with no moving parts, and the main limit is that you cannot remove the wheels while the car is on them.

Pros

  • The 17-degree incline suits many low-clearance cars.
  • The non-skid base reduces slipping.
  • The ramps are light and nest together for storage.
  • No hydraulics means nothing can leak down.

Cons

  • You cannot remove wheels while the car is on the ramps.
  • Lift height is only 6.5 inches.
  • Lowered cars may still scrape the bumper, as one owner noted (Desertcart, 2026).

Common Problems When Using Car Ramps

ProblemLikely causeSolution
Ramps slide forwardSmooth or dusty floorClean the floor or use a rubber mat
Bumper hits the rampCar too lowUse short boards to start the climb
Tire hangs over the edgeTire too wideUse RhinoRamps MAX or wider ramps
Car rolls backParking brake off or no chocksSet the brake and chock the rear wheels

How to Store and Look After Plastic Ramps

Plastic ramps last for years if you keep them clean and check them before each use. Look for cracks, deep gouges or warped sections, and stop using a ramp that shows any damage.

Nest the ramps together and store them indoors. Long exposure to strong sun can age plastic over time.

Rinse off mud and grit after use, because dirt on the base reduces grip on the floor and can let the ramp slide when you drive up.

Frequently Asked Questions About RhinoRamps

How much weight can RhinoRamps hold?

They are rated for vehicles up to 12,000 lb GVW, with 3,000 lb per ramp (ExtremeTerrain, 2026).

How high do RhinoRamps lift a car?

They lift the vehicle 6.5 inches (ExtremeTerrain, 2026).

Can I change brake pads with the car on ramps?

No. The wheels must stay on the ramps. Use a jack and jack stands for pad and rotor jobs.

Are RhinoRamps good for low cars?

The 17-degree incline helps, but very low cars may still need boards to start the climb (Walmart, 2026).

What is the difference between RhinoRamps and RhinoRamps MAX?

The MAX version is rated at 16,000 lb GVW and fits wider tires (Hopkins, 2019).

Summary: Are RhinoRamps Worth Buying?

  • RhinoRamps are stable, light drive-on ramps rated for 12,000 lb GVW.
  • They lift the vehicle 6.5 inches on a low 17-degree slope.
  • They suit inspections, brake line work and fluid jobs.
  • Use a jack and stands for any job that needs the wheels off.

See the rest of the tools you need in our DIY brake job tools checklist.

Check RhinoRamps on Amazon →

Safety note: brakes are safety parts. If you are not sure how to do the job, have a qualified mechanic do it.