Published: January 14, 2027 | Last updated: January 14, 2027

TL;DR

  • Hawk HP Plus pads use a Ferro-Carbon compound made for autocross, Solo II and track day driving (Hawk Pads Direct, 2026).
  • They work from 100 to 800°F, with an optimal range of 300 to 600°F (Hawk Pads Direct, 2026).
  • Hawk describes the friction level as extremely high, with strong fade resistance (Comp Brake, 2026).
  • Expect more noise, dust and rotor wear than a street pad, and some squeal during normal commuting (SubiMods, 2026).
  • HP Plus pads are for iron rotors only, not carbon ceramic rotors (SubiMods, 2026).

Disclosure: As an Amazon Associate, Brakes Hub earns from qualifying purchases. This never changes our verdicts.

How we reviewed this product: we studied Hawk's published specifications, retailer listings and owner feedback. We did not run our own track tests.

What Are Hawk HP Plus Brake Pads?

Hawk HP Plus pads are performance brake pads for drivers who take a street car to autocross or track days. Hawk designed them to handle track heat and still get you home without changing pads (Hawk Pads Direct, 2026).

Part numbers usually end in "N", such as HB191N.590. The letter N marks the HP Plus compound.

Hawk Performance is a brand of Carlisle Brake and Friction.

What the Temperature Range Means

Every brake pad works best inside a temperature window. HP Plus pads operate from 100 to 800°F, and grip best between 300 and 600°F (Hawk Pads Direct, 2026).

On the street, pads often stay below 300°F, so HP Plus pads may feel less refined and squeal until they warm up. On an autocross course, they reach their best range quickly.

A good comparison is a running shoe made for racing. It feels best at full speed and can feel stiff when you are just walking.

Hawk HP Plus Specifications at a Glance

SpecificationHawk HP Plus
CompoundFerro-Carbon
Operating range100 to 800°F
Optimal range300 to 600°F
Friction levelExtremely high
Best useAutocross, track days, sprints, hill climbs
Rotor typeIron rotors only

Sources: Hawk Pads Direct (2026); Comp Brake (2026); SubiMods (2026).

Who Should Use Hawk HP Plus Pads?

Hawk HP Plus pads suit drivers who autocross or do track days in a street car and do not want to swap pads at the event.

They are a poor choice for pure daily driving. Hawk warns that the high friction can affect rotor wear, noise, dust and pad life (SubiMods, 2026). One owner reported squeal after 20 minutes of commuting, but no squeal at full temperature during autocross (SubiMods, 2026).

For mostly street driving with some spirited use, the Hawk HPS 5.0 is a better fit.

Hawk HP Plus vs Other Performance Pads

PadBest for
Hawk HPS 5.0Spirited street driving
Hawk HP PlusAutocross and track days on a street car
Ferodo DS2500Street plus light track use

How to Install and Bed In Hawk HP Plus Pads

To install HP Plus pads, fit them on clean iron rotors, remove old pad deposits, and bed them in carefully. Follow these steps.

  1. Confirm the part number and that your car has iron rotors.
  2. Resurface or replace rotors, or clean off old pad material if the rotors are smooth (Hawk Pads Direct, 2026).
  3. Clean the caliper bracket and lubricate the contact points.
  4. Fit the pads and torque all bolts to specification.
  5. Bed in the pads. Hawk burnishes pads at the factory, but all pads still need bedding in (SubiMods, 2026).
  6. Flush brake fluid with a high-boiling fluid such as Motul RBF 600 before track use.

Pros and Cons of Hawk HP Plus Pads

The main strength of Hawk HP Plus pads is very high friction with strong fade resistance for competition, and the main limit is noise, dust and wear in daily driving.

Pros

  • Extremely high friction gives strong stopping power.
  • Strong fade resistance during repeated heavy braking.
  • Usable to and from the track without swapping pads.
  • Good cold bite for a performance pad (Comp Brake, 2026).

Cons

  • Expect more noise, dust and rotor wear (SubiMods, 2026).
  • May squeal during normal commuting.
  • Not for carbon ceramic rotors.

Common Problems With HP Plus Pads

ProblemLikely causeSolution
Squeal around townPads below working temperatureExpected; use a street pad for daily driving
Heavy dustHigh-friction compoundExpected; clean wheels more often
Fast rotor wearAggressive compoundInspect rotors often
Soft pedal on trackBrake fluid boilingUse a high-boiling racing fluid

Street Driving Tips for Hawk HP Plus Owners

If you drive HP Plus pads on the street between events, a few habits reduce noise and wear. The pads work best between 300 and 600°F, so they can feel less smooth when cold (Hawk Pads Direct, 2026).

  • Expect some squeal on short trips, as one owner reported after 20 minutes of commuting (SubiMods, 2026).
  • Clean wheels often, because high-friction pads produce more dust.
  • Check pad thickness after each event and replace pads at about 1/8 inch of material (SubiMods, 2026).
  • Inspect rotors for cracks and uneven wear more often than with street pads.
  • For long commuting periods, consider fitting a street pad and keeping HP Plus pads for event weekends.

Preparing Brakes for an Autocross or Track Day

Before an event, check pad thickness, rotor condition and brake fluid age. Old fluid can boil under repeated hard stops and cause a soft pedal. Flushing with a high-boiling fluid and bleeding the system, for example with Speed Bleeders, gives a firm, consistent pedal.

Frequently Asked Questions About Hawk HP Plus Pads

What is the temperature range of Hawk HP Plus?

100 to 800°F, with 300 to 600°F as the optimal range (Hawk Pads Direct, 2026).

Are Hawk HP Plus pads good for daily driving?

They can be driven on the street, but expect more noise, dust and rotor wear (SubiMods, 2026).

Can Hawk HP Plus pads be used on carbon ceramic rotors?

No. Hawk pads are designed for iron rotors only (SubiMods, 2026).

When should I replace Hawk HP Plus pads?

Replace them when about 1/8 inch of friction material remains (SubiMods, 2026).

Do Hawk HP Plus pads need bedding in?

Yes. All pads need bedding in with the rotors they run on (SubiMods, 2026).

What is the difference between HP Plus and HPS 5.0?

HP Plus is built for autocross and track days, while HPS 5.0 is a performance street pad.

Summary: Are Hawk HP Plus Pads Worth Buying?

  • Hawk HP Plus pads give very high friction for autocross and track days.
  • They work best between 300 and 600°F.
  • Expect more noise, dust and rotor wear on the street.
  • Choose HPS 5.0 for mostly street driving.

Check Hawk HP Plus fitment on Amazon →

Safety note: brakes are safety parts. If you are not sure how to do the job, have a qualified mechanic do it.